The Motion detection sensor is used to detect motion in an area in front of it. The detection range is up to 5 meters from the 0° center and up.
How to Pair
- In your mobile app, make sure the gateway is in pairing mode by going to Sensors -> Motion -> Add new sensor.
- Remove the back cover, and insert the batteries provided.
- Press the button on the back once (button next to batteries).
- Wait for the LED to stop blinking.
- Tap the next button in your mobile app.
- Give your sensor a name.
- If the pairing fails then please try again.
- It is not recommended placing the sensors in places where the temperature is expected to be bellow -10°C or above 50°C.
- Face the front of the sensor in the direction where the motion should be detected.